Customer Service Inspector/Cross Connection Control

WWW019 - 16.00 Hours

Description

The Customer Service Inspector/Cross Connection Control course is primarily designed to provide the necessary training for individuals who have met the Texas Commission on Environmental Quality requirements and wish to obtain a customer service inspector license. The holder of the customer service inspector license may perform a Customer Service Inspection (CSI) as outlined by the rules and regulations provided by the TCEQ. Other licensed individuals may also receive valuable information relating to their field. The participant, during this course, will gain the necessary information and understanding of the federal, state, and local rules and regulations as they pertain to the Customer Service Inspector (CSI), Plumbing Inspector, Water Supply Protection Specialist (WSPS), Water Purveyor, and Backflow Prevention Assembly Tester (BPAT). During this course, the participant will learn how to find and eliminate cross-connections. The participant will also learn ways to identify water piping, solder, and flux that exceed the allowable lead (Pb) limits, as set forth by the Environmental Protection Agency (EPA) and the TCEQ. The participant will also learn the proper installation and application of Backflow Prevention Assemblies.

Schedule

  • Details
    11/11/2019 - 11/12/2019
    San Antonio TX
    IS  WWW019  9
    $300.00
  • Details
    11/18/2019 - 11/19/2019
    Mesquite TX
    IS  WWW019  3
    $325.00
  • Details
    12/5/2019 - 12/6/2019
    Eagle Pass TX
    IS  WWW019  27
    $85.00
  • Details
    1/7/2020 - 1/8/2020
    Cedar Park TX
    IS  WWW019  26
    $325.00
  • Details
    5/4/2020 - 5/5/2020
    Harlingen TX
    IS  WWW019  31
    $85.00
  • Details
    5/11/2020 - 5/12/2020
    Mesquite TX
    IS  WWW019  21
    $325.00
  • Details
    5/11/2020 - 5/12/2020
    San Antonio TX
    IS  WWW019  23
    $325.00
  • Details
    8/17/2020 - 8/18/2020
    El Paso TX
    IS  WWW019  30
    $300.00
  • Details
    9/1/2020 - 9/3/2020
    Marble Falls TX
    IS  WWW019  29
    $325.00
  • Details
    9/29/2020 - 10/1/2020
    Conroe TX
    IS  WWW019  25
    $325.00
  • Details
    11/3/2020 - 11/4/2020
    Mesquite TX
    IS  WWW019  22
    $325.00
  • Details
    12/1/2020 - 12/2/2020
    San Antonio TX
    IS  WWW019  24
    $325.00

This schedule is subject to change without notice. If you have not received confirmation of the class prior to the class start, please contact the division at (800) 723-3811 or (800) SAFE-811 or itsi@teex.tamu.edu to get the latest schedule.

Description

The Customer Service Inspector/Cross Connection Control course is primarily designed to provide the necessary training for individuals who have met the Texas Commission on Environmental Quality requirements and wish to obtain a customer service inspector license. The holder of the customer service inspector license may perform a Customer Service Inspection (CSI) as outlined by the rules and regulations provided by the TCEQ. Other licensed individuals may also receive valuable information relating to their field. The participant, during this course, will gain the necessary information and understanding of the federal, state, and local rules and regulations as they pertain to the Customer Service Inspector (CSI), Plumbing Inspector, Water Supply Protection Specialist (WSPS), Water Purveyor, and Backflow Prevention Assembly Tester (BPAT). During this course, the participant will learn how to find and eliminate cross-connections. The participant will also learn ways to identify water piping, solder, and flux that exceed the allowable lead (Pb) limits, as set forth by the Environmental Protection Agency (EPA) and the TCEQ. The participant will also learn the proper installation and application of Backflow Prevention Assemblies.

Prerequisites

There are no prerequisites for this course.

Attendance Requirements

Class attendance is an essential part of the education process and participants in TEEX courses are expected to attend all class sessions and field exercises. This course requires participants to attend a minimum of 100% of the class hours as a component of successful course completion. During the course, your instructor will review any additional attendance requirements, for example a field exercise that cannot be missed.

Topics

Introduction to Customer Service Inspections+Regulations+Hydraulic Principles+Cross-Connection Control—Methods of Installation+Lead+Customer Service Inspection+Performing Customer Service and Cross-Connection+Inspections

Suggested Audience

This course is designed for personnel conducting customer service inspections and those involved in cross-connection control.

Continuing Education and Professional Credits

1.6 CEUs
  • TCEQ licensed Customer Service Inspectors+TCEQ licensed water operators+TCEQ licensed Backflow Prevention Assembly Testers (BPAT)
  • Contact Information

    Infrastructure Training & Safety Institute
    OSHA Training Institute Education Center
    Phone: (979) 458-9188 | Tollfree: (800) 723-3811 or (800) SAFE-811

    Related Courses

    WWW505+WWW500+WWW001+WWW009Backflow Prevention Assembly Tester's 24-Hour Continuing Education+Backflow Prevention Assembly Tester+Basic Water Works Operations+Customer Service InspectorBackflow Prevention Assembly Tester's 24-Hour Continuing Education+Backflow Prevention Assembly Tester+Basic Water Works Operations+Customer Service InspectorBackflow Prevention Assembly Tester's 24-Hour Continuing Education+Backflow Prevention Assembly Tester+Basic Water Works Operations+Customer Service Inspector

    Policies

    TEEX Policies
    © Copyright 2019 Texas A&M Engineering Extension Service
    A member of the Texas A&M University System
    Ver.1.2015.0204