Occupational Safety and Health Standards for General Industry (OSHA #511)

OSH511 - 31.00 Hours

Schedule

  • Details
    4/24/2018 - 4/27/2018
    Mesquite TX
    OS  OSH511  429
    $650.00
  • Details
    4/30/2018 - 5/3/2018
    Harlingen TX
    OS  OSH511  448
    $105.00
  • Details
    5/22/2018 - 5/25/2018
    Mesquite TX
    OS  OSH511  430
    $650.00
  • Details
    5/22/2018 - 5/25/2018
    Houston TX
    OS  OSH511  437
    $650.00
  • Details
    5/22/2018 - 5/25/2018
    Camden AR
    OS  OSH511  454
    $650.00
  • Details
    6/5/2018 - 6/8/2018
    San Antonio TX
    OS  OSH511  441
    $650.00
  • Details
    6/11/2018 - 6/14/2018
    Odessa TX
    OS  OSH511  451
    $650.00
  • Details
    6/25/2018 - 6/28/2018
    Texas City TX
    OS  OSH511  456
    $650.00
  • Details
    6/26/2018 - 6/29/2018
    Mesquite TX
    OS  OSH511  431
    $650.00
  • Details
    7/17/2018 - 7/20/2018
    Camden AR
    OS  OSH511  455
    $650.00
  • Details
    8/7/2018 - 8/10/2018
    San Antonio TX
    OS  OSH511  442
    $650.00
  • Details
    8/27/2018 - 8/30/2018
    Hobbs NM
    OS  OSH511  450
    $650.00
  • Details
    8/28/2018 - 8/31/2018
    Mesquite TX
    OS  OSH511  432
    $650.00

This schedule is subject to change without notice. If you have not received confirmation of the class prior to the class start, please contact the division at (800) 723-3811 or (800) SAFE-811 or itsi@teex.tamu.edu to get the latest schedule.

Description

OSHA for General IndustryThe Occupational Safety and Health Standards for General Industry (OSHA #511) course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.

Prerequisite

There are no prerequisites for this course.

Topics

Recordkeeping +Subpart D - Walking/Working surfaces +Subpart E - Exit routes, emergency action plans, fire prevention plans +Subpart I - Personal Protective Equipment +Subpart J - Permit Required Confined Space +Subpart L - Fire Protection +Subpart N - Materials Handling +Subpart O - Machine Guarding +Subpart S - Electrical

Audience

  • Industrial Hygienists
  • Safety Supervisors
  • Building Inspectors
  • Hazardous Waste Managers

Government Programs, Certifications and Accreditations

Post 9/11 GI Bill Benefits For information contact (877) 833-9638

Education Credits

  • 3.1 CEUs

Contact Information

Infrastructure Training & Safety Institute
OSHA Training Institute Education Center
Phone: | Tollfree: (800) 723-3811 or (800) SAFE-811

Policies

Student Attendance Policy

TEEX and the OSHA Training Institute (OTI) have an attendance policy that requires all students to fully attend enrolled classes. In order for the student to receive a certificate of completion, they must attend the entire class. We realize that extenuating circumstances may arise that would take a student out of class and have implemented the following policy to handle those situations. Below are the responsibilities and expectations of students in a TEEX course.

  • Participants are expected to attend 100% of the course in which they are enrolled before a certificate of successful completion can be issued.  
  • If an extenuating circumstance arises in which a participant is unable to attend 100% of class, the participant must get with the instructor to complete the Participant Makeup Time Request form prior to their leaving the classroom.  If the extenuating circumstance arises during non-class hours, then the participant must get with the instructor to complete the Participant Makeup Time Request form when they return to the class.  If the participant is unable to return to class, they must still contact the instructor for the required processing.
  • If the instructor approves an absence and the absence time is less than 20% of the class time, the instructor can assign makeup work for equivalent time missed.  
  • All assigned makeup work must be documented, checked by the instructor and returned with class materials to be maintained in the class record as required by OSHA and TEEX.
  • For all other approved absences, participants must enroll through TEEX Registration to retake the course within the OSHA required six-month time frame.
  • Unexcused absences require participants to register/pay/attend the class again at another time.

Related Courses

OSH501+OSH521+OSH201+OSH711Trainer Course in Occupational Safety and Health Standards for General Industry (OSHA #501)+OSHA Guide to Industrial Hygiene (OSHA 521)+Hazardous Materials (OSHA #2015)+Lockout/Tagout (OSHA #7115)Trainer Course in Occupational Safety and Health Standards for General Industry (OSHA #501)+OSHA Guide to Industrial Hygiene (OSHA 521)+Hazardous Materials (OSHA #2015)+Lockout/Tagout (OSHA #7115)Trainer Course in Occupational Safety and Health Standards for General Industry (OSHA #501)+OSHA Guide to Industrial Hygiene (OSHA 521)+Hazardous Materials (OSHA #2015)+Lockout/Tagout (OSHA #7115)
© Copyright 2018 Texas A&M Engineering Extension Service
A member of the Texas A&M University System
Ver.1.2015.0204